Balanced Studio Patch Interconnect Lead 3.5mm Straight Stereo mini Jack Male to 1/4 Right Angle Stereo Jack Male Van Damme Cable

“Hear the difference with the highest quality performance cables”

Welcome to our shop.

This cable is made with a NEUTRIK/REAN connectors and is available as 1 to 10 meters length in 10 different colours. Cable is terminated with a 3.5mm straight stereo mini Jack Male NEUTRIK/REAN NYS231BG black hard gold plated connector to 1/4 right angle stereo Jack Male NEUTRIK NP3RX-B black hard gold plated connector and is made with a Van Damme Pro Grade Classic XKE Patch Cable. 

•This cable has a coloured boot on Jack side.

•This cable has a special coloured heat shrink for extra damage protection on both sides.

•This cable is terminated using 4% Silver solder - lead free RoHS compliant. 

•This cable is for a professional studio/stage or home Hi-Fi/DJ use.

Wiring Specification:  INSTRUMENT / PATCH / INTERCONNECT CABLE (Balanced / Unbalanced - Stereo)
3.5mm STEREO MINI JACK TRS	>	1/4 STEREO JACK 6.3mm TRS
JACK CASING: GROUND / SHIELD	>	JACK CASING: GROUND / SHIELD
JACK RING: -LIFE / SIGNAL / RIGHT CHANNEL	>	JACK RING: -LIFE / SIGNAL / RIGHT CHANNEL
JACK TIP: +LIFE / SIGNAL / LEFT CHANNEL	>	JACK TIP: +LIFE / SIGNAL / LEFT CHANNEL

Van Damme Pro Grade Classic XKE Pro-patch cable has been specifically designed as a 4.85 mm overall diameter cable to suit Neutrik and Switchcraft bantam jacks, and other applications requiring a lower OD cable. Its braided screen and tightly packed construction ensure that the smaller size in no way compromises the mechanical and sonic integrity.

Material

The cable conductor is made of a mixture of ultra-pure oxygen-free copper, silver-plated and ultra-pure oxygen-free copper. As with other Van Damme cables, ultra-pure oxygen-free copper increases conductivity and ease of soldering. An additional advantage of UPSPOFC (Ultra Pure Oxygen-Free Copper, Silver Coated) is approximately 5% lower resistance than copper. High frequencies, which flow outside the conductor, due to the skin effect, are conducted slightly better than low frequencies, which tend to fill the UPOFC conductor. Additionally, silver has a lower ability to corrode than copper, so the coating provides a protective barrier between the conductor and insulation from free air. Cross-linked polyethylene (XLPE) was used to insulate the conductors. The advantage of this solution is a clear advantage compared to other insulating materials such as conventional polyethylene. XLPE has a dielectric constant of 2.2 at 1kHz, significant minimization of signal loss at high frequencies, and stability at high temperatures. This stability makes the insulation material resistant to shrinkage during the soldering process. It also has good resistance to abrasion and breaking, which decreases only at -40 degrees Celsius. The pair of conductors is twisted together with a natural textile filter to eliminate electrostatic charges and is covered with a woven OPOFC shield braid to ensure high resistance to electromagnetic interference, radio wave band and mains power. A natural filler was used to prevent changes in the cable's capacity along its length and ensure noise-free operation. The cable sheath is made of an abrasion-resistant PVC/Neoprene composite, ensuring adequate flexibility even at negative temperatures. The cable is available in ten colors.

Application

•For mic and line level analogue balanced audio.

•Bantam patch cords and bantam adapter cables.

•Shorter mic cables and XLR splitter cables.

•Midi leads and other DIN connector applications.

Installation Notes

•Further improved outer jacket ensures cable remains flexible in sub-zero temperatures.

•Tightly packed cotton fillers ensure no static build up and even capacitance.

•Available in 10 colors for application or length color coding.

•95% optical coverage braided screen for excellent mechanical strength and EMI/RFI rejection.

•Combination of silver plated and plain ultra-pure oxygen free copper conductors for unsurpassed sound quality.

Mechanical Specification

Conductors 7 x 0.10 mm bare silver plated oxygen-free copper

21 x 0.10 mm bare ultra-pure oxygen-free copper

Conductor size 28 x 0.10 mm, 0.22 mm2, AWG 24/28

Insulation Cross-linked polyethylene

Screen type(s) 96 x 0.10 mm braided tinned oxygen free copper wire, 95% optical coverage

Jacket material Flexible PVC/Neoprene composite

Overall diameter 4.85 ± 0.10 mm

Bend radius 10 x overall diameter

Electrical Specification

Resistance Conductor < 85 Ohm/km

Insulation > 5000 MOhm/km

Capacitance Core to core 50 pF/m

Core to screen 95 pF/m

FREE velcro cable tie.

We also make straight-straight, angle-angle, 3.5mm Jack-3.5mm Jack, 1/4 Jack- 1/4 Jack, unbalanced, Y and 2-48 pair multicores version so please visit our other items or contact us before you buy.

If you need any different audio/video/digital cables not specified on this add please also contact us. We can make any custom cable you need ! All NEUTRIK and REAN connectors are available. We also offer custom cable identification service so we can put cable labels, coloured boots and/or marking rings.

"Your cables experts"