“Hear the difference with the highest quality performance cables”
Welcome to our shop.
This cable is made with a NEUTRIK connectors and is available as 1 to 10 meters length in blue colour. Cable is terminated with a 1/4 straight stereo Jack Male NEUTRIK NP3X-B black hard gold plated connector to 2x 3-pin straight XLR Male/Female (send/return) NEUTRIK NC3MXX-B/NC3FXX-B black hard gold plated connectors and is made with a Van Damme Blue Studio Series 2 Pair Multicore Cable. This cable is used for mixing console Insert points where the Tip of the 1/4 Jack is considered the "Send" while the Ring is "Return". This is the standard convention type used on most mixing consoles, but the reverse wiring version is also available in our store.
For different length of splitting point please contact us !
•This cable has a special glued heat shrink for extra damage protection on both sides.
•This cable has a 15cm pliosil breakouts for extra damage protection.
•This cable is terminated using 4% Silver solder - lead free RoHS compliant.
•This cable is for a professional studio/stage or DJ use.
•This cable is for (standard convention) type mixing desk.
Wiring Specification:
STUDIO Y SPLITTER INSERT / STANDARD CONVENTION CABLE
(Unbalanced)
|
1/4 STEREO JACK 6,3mm TRS |
> |
2x 3-PIN XLR |
JACK CASING: GROUND / SHIELD |
> |
PIN 1 + PIN 3: GROUND / SHIELD (XLR 1 + XLR 2) |
JACK RING: +LIVE / RETURN |
> |
PIN 2: +LIVE / SIGNAL / RETURN XLR 2 FEMALE |
JACK TIP: +LIVE / SEND |
> |
PIN 2: +LIVE / SIGNAL / SEND XLR 1 MALE |
Van Damme Blue Studio Series 2 Pair Multicore Cable. This is the analogue pre-jacketed cable of choice for the professional users. Extremely flexible, sonically transparent and intelligently designed with both numbered and colour coded pairs. This cable more than satisfies the rigorous demands of studio engineers, installers and manufacturers. It has been extensively utilised in studios around the world from the BBC to Abbey Road.
Material
The cable conductor is made of a mixture of ultra-pure oxygen-free copper, silver-plated and ultra-pure oxygen-free copper. As with other Van Damme cables, ultra-pure oxygen-free copper increases conductivity and ease of soldering. An additional advantage of UPSPOFC (Ultra Pure Oxygen-Free Copper, Silver Coated) is approximately 5% lower resistance than copper. High frequencies, which flow outside the conductor, due to the skin effect, are conducted slightly better than low frequencies, which tend to fill the UPOFC conductor. Additionally, silver has a lower ability to corrode than copper, so the coating provides a protective barrier between the conductor and insulation from free air. Cross-linked polyethylene (XLPE) was used to insulate the conductors. The advantage of this solution is a clear advantage compared to other insulating materials such as conventional polyethylene. XLPE has a dielectric constant of 2.2 at 1kHz, significant minimization of signal loss at high frequencies, and stability at high temperatures. This stability makes the insulation material resistant to shrinkage during the soldering process. It also has good resistance to abrasion and breaking, which decreases only at -40 degrees Celsius. The cable sheath is made of an abrasion-resistant PVC/Neoprene composite, ensuring adequate flexibility even at negative temperatures.
Applications
•Audio multicore looms for 2 - 48 pairs.
•Multipin breakout cables.
•Fixed installations in areas not requiring Low Smoke Zero Halogen cables.
•Static stagebox systems for example in schools, colleges & Houses of Worship.
•Recording and post production equipment interconnects.
•Wiring of B Gauge & Bantam patchbays where individual screens are required.
•Industrial paired data transmission where flexibility is required.
Applications Notes
•For the transmission of multiple analogue balanced audio signals.
•Extremely flexible jacketing materials used.
•Pre-jacketed pairs ideal for formed equipment and rack wiring.
•Application checked overall diameters - 2 pair fits into a Neutrik balanced jack; 8 pair sized to suit D25 shells.
•Ultra-pure oxygen free copper for outstanding sonic integrity.
Mechanical Specification
Pairs 2 Pair
Conductor 28 x 0.10mm bare ultra-pure oxygen-free copper
Conductor size 28 x 0.10 mm, 0.22 mm2, AWG 24/28
Insulation Polypropylene
Insulation diameter 1.20 ± 0.10 mm
Colour code IEC 189-2 appendix A
Pair colours
Pair 1 White/Blue
Pair 2 White/Orange
Drain wire 19 x 0.12 mm tinned ultra-pure oxygen-free copper
Drain wire size 19 x 0.12 mm, 0.22 mm2, AWG 24/19
Screen 24 μm Aluminium/Polyester Foil > 150% coverage
Jacket material Flexible PVC composite
Overall diameter 2.70 ± 0.15 mm
Colour Sapphire Blue, RAL 5003
Overall Construction
Jacket material Flexible PVC composite
Colour Sapphire Blue, RAL 5003
Overall diameter 7.50 ± 0.15 mm
Bend radius 10 x overall diameter
Operating temperature -20 to +70°C
Electrical Specification
Resistance
Conductor < 90 Ohm/km
Insulation > 5000 MOhm/km
Capacitance
Core to core 100 pF/m
Core to screen 200 pF/m
We offer the cable in various lengths, so please choose the right one before purchasing !
FREE velcro cable tie.
We also make right angle, Jack-Jack, reverse convention and 2-48 pair multicores version so please check our other items or contact us before you buy.
If you need any different audio/video/digital cables not specified on this add please also contact us. We can make any custom cable you need ! All NEUTRIK and REAN connectors are available. We also offer custom cable identification service so we can put cable labels, coloured boots and/or marking rings.
"Your cables experts"