“Hear the difference with the highest quality performance cables”

Welcome to our shop.

This cable is made with a NEUTRIK/REAN connectors and is available as 1.2 to 7 meters length in 10 different colours. Cable is terminated with a 3.5mm stereo right angle mini Jack Male NEUTRIK NTP3RC-B black hard gold plated connector to 3-pin mini XLR Female NEUTRIK/REAN RT3FC-B black hard gold plated connector and is made with a Van Damme Pro Grade Classic XKE 1 Pair Cable.

•This cable has a special coloured heat shrink for extra damage protection on both sides.

•This cable is terminated using 4% Silver solder - lead free RoHS compliant. 

•This cable is for a professional studio/stage or DJ/home Hi-Fi use.

•This cable is compatible with any portable audio players with a 3.5mm stereo Jack socket.

 
* Please note that PIN 2 and 3 are swapped for this cable !

Wiring Specification:

AKG HEADPHONE REPLACEMENT CABLE

(Unbalanced - Stereo)

3.5mm STEREO MINI JACK TRS
>
3-PIN MINI XLR
JACK CASING: GROUND / SHIELD
>
PIN 1: GROUND / SHIELD
JACK RING: -LIFE / RIGHT CHANNEL
>
PIN 2: -LIFE / RIGHT CHANNEL
JACK TIP: +LIFE / LEFT CHANNEL
>
PIN 3: +LIFE / LEFT CHANNEL

Van Damme Pro Grade Classic XKE 1 pair install cable is a foil screened twisted pair for installation and rack wiring. Tough, flexible and very easy to prepare as the foil screen is bonded to the outer jacket, this cable type is also useful for ‘bodge leads’, adaptor cables and multipin breakouts where individual tails need to be colour identified or are to be permanently installed.

Material

The cable conductor is made of a mixture of ultra-pure oxygen-free copper, silver-plated and ultra-pure oxygen-free copper. As with other Van Damme cables, ultra-pure oxygen-free copper increases conductivity and ease of soldering. An additional advantage of UPSPOFC (Ultra Pure Oxygen-Free Copper, Silver Coated) is approximately 5% lower resistance than copper. High frequencies, which flow outside the conductor, due to the skin effect, are conducted slightly better than low frequencies, which tend to fill the UPOFC conductor. Additionally, silver has a lower ability to corrode than copper, so the coating provides a protective barrier between the conductor and insulation from free air. Cross-linked polyethylene (XLPE) was used to insulate the conductors. The advantage of this solution is a clear advantage compared to other insulating materials such as conventional polyethylene. XLPE has a dielectric constant of 2.2 at 1kHz, significant minimization of signal loss at high frequencies, and stability at high temperatures. This stability makes the insulation material resistant to shrinkage during the soldering process. It also has good resistance to abrasion and breaking, which decreases only at -40 degrees Celsius. The pair conductors are twisted together and shielded with aluminum and polyester tape. The whole thing is covered with a PVC/neoprene composite. This material provides adequate flexibility, even at temperatures below 0 degrees Celsius. The cable is available in ten colors.

Application

•Internal cabling of rack systems and patch panels.

•Installations that do not require LSZH protective materials.

•Adapter cables and multi-point breakouts.

Installation Notes

•Foil screen connected to the outer jacket to facilitate the preparation process.

•Available in 10 colors makes it easier to recognize connections or lengths.

•24AWG tinned drain wire in close contact with aluminum/polyester FEF shield.

•Combination of silver-plated and smooth copper conductors, ultra-pure, oxygen-free for unrivaled sound quality.

Mechanical Specification

Conductors 1 x 0.20 mm silver plated oxygen-free copper

6 x 0.20 mm tinned ultra-pure oxygen-free copper

Conductor size 7 x 0.20 mm, 0.22 mm2, AWG 24/7

Insulation Cross-linked polyethylene

Screen type Aluminium Polyester foil, > 150% coverage

Drain wire 7 x 0.20 mm tinned ultra-pure oxygen-free copper

Jacket material Flexible PVC/Neoprene composite

Overall diameter 3.50 ± 0.10 mm

Bend radius 10 x overall diameter

Electrical Specification

Resistance Conductor < 85 Ohm/km

Insulation > 5000 MOhm/km

Capacitance Core to core 65 pF/m

Core to screen 135 pF/m

We offer the cable in various lengths and colors, so please choose the right one before purchasing !

BLACK

BROWN

RED

ORANGE

YELLOW

GREEN

BLUE

PURPLE

GRAY

WHITE

FREE velcro cable tie.

We also make straight and 1/4 stereo Jack version so please check our other items or contact us before you buy. 

If you need any different audio/video/digital cables not specified on this add please also contact us. We can make any custom cable you need ! All NEUTRIK and REAN connectors are available. We also offer custom cable identification service so we can put cable labels, coloured boots and/or marking rings.

Van Damme

"Your cables experts"

16 other products in the same category:

Product added to compare.